DL-BR-SUB 120/T-EN54
- power adjustment at the front
- 180° phase switch at the front
- tremendous bass response
Ceiling subwoofer for EN54 voice alarm applications, best suited for the combination with full-range loudspeakers for powerful bass response.
The 120W powered subwoofer is equipped with a 200mm high-performance system featuring 4 power adjustments. DL-BR-SUB 120 offers an amazing deep bass response which gives your voice alarm installation a rich sound quality.
Power tappings are easily set at the front of the speaker, and a low-impedance operation at 4 ohms is also possible. The crossover frequency is set to 135 Hz. You can change the phase 180° by a switch at the front. To make things perfect the metal housing in RAL 9016 guarantees long-term durability.
Protection class IP 21C secures the speaker against the risks of environmental influences. The speaker chassis is impregnated against wetness.
In combination with wideband loudspeakers, the DL-BR-SUB delivers a sensational music quality that provides a completely new audio experience in EN54 voice alarm installations.
| Article No.: | 20194237 |
| Product | DL-BR-SUB 120/T-EN54 |
| Power | 120/60/30/15/ (4) W |
| Impedance (100V) | 83/167/333/667 ohm |
Frequency Range |
32-280 Hz (-10 dB) |
|
Frequency Response |
50-200 Hz (+-3dB) |
|
SPL 1W/1m, peak |
90,0 dB |
|
SPL 1W/4m, peak |
78,0 dB |
|
SPL Pmax/4m, peak |
95,8 dB |
|
Sensitivity EN54-24, 1W/1m |
87,0 dB |
|
Sensitivity EN54-24, 1W/4m |
75,0 dB |
| Connector | 4-pin screw terminal |
| Terminal Diameter | 2,5 mm |
| Maximum Cable Passage | 4,9 mm² |
| Temperature Range | -10 / +55 C° |
| Dimensions | 319 x 250 mm |
| Ceiling Cut-out | 302 mm |
| Type A/B | A |
| IP Rating | IP21 |
| Weight (net) | 6,4 kg |
| Colour | RAL 9016 |
| Mounting | Quick-mount clamps |
| Packing Unit | 2 |
| Ref. Nr. | 020-19 |
| ID-Code | SAA-LS20 |
|
|
|
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment. RoHS compliant (2011/65/EU) The IP rating as well as the temperature range specified are based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance. |
|
DL-BR-SUB 120/T-EN54 (English)
NEW! Products 2025
