ic audio logo

DL-Q 10-165/T

DL-Q 10-165/T

DL-Q 10-165/T DL-Q 10-165/T
  • quick mounting
  • shock-resistant housing
  • unobtrusive installation

EN 54-24:2008
:
:

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

These nice ceiling speakers are fitting perfect into panel ceilings and will provide clear sound performance very discreet. The 10W powered speaker is equipped with a 165mm full-range loudspeaker chassis and a 100V transformer with 4 power adjustments. The impact-resistant ABS housing in RAL 9010 guarantees long-term stability. The speakers can be easily installed by a sophisticated mounting system which is based on screws. The time for mounting will be reduced remarkably.

The speaker is connected by a 2-pin push-clamp.

This speaker is suitable for a ceiling strength of about 6 – 38 mm. Our specification is primarily related to solid ceilings, for ceilings with soft materials a higher ceiling thicknesses could be necessary. In addition, stronger cables and other fittings may also result in changes of the appropriate setup. With regard to the variety of materials and manufacturers, we recommend to build in a sample of the speaker to match the requirements accurately.

ic audio logo

DL-Q 10-165/T

Technical Data (Electrical)
Description DL-Q 10-165/T
Power 10/6/3/1,5 W
Frequency Range 77 - 20.000 Hz
Frequency Response 70 - 24.000 Hz
Please note: Because of many different types of ceiling materials and ceiling strengths we recommend to build in a sample of the speaker to match the requirements accurately.

Technical Data (Mechanical)
Dimensions 220x220x85 mm
Weight (net) 1,40 kg
Ceiling Cut-out 190 mm
Temperature Range -20 / +80 °C
Mounting Screws
Connector 2-pin push clamp
Colour RAL 9010

Product Attributes
ic audio logo

DL-Q 10-165/T

Technical Drawing

ic audio logo

DL-Q 10-165/T

Frequency Response Diagram

Sensitivity
ic audio logo

DL-Q 10-165/T

Isobar

ic audio logo

DL-Q 10-165/T
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.