ic audio logo

DL-AB 06-200/T-EN54

DL-AB 06-200/T-EN54

DL-AB 06-200/T-EN54 DL-AB 06-200/T-EN54
  • Quick mounting
  • Highest reliability
  • BS 5839

EN 54-24:2008
Ref. Nr.: 010-14
ID-Code: SAA-LS01
1438-CPR-0233

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

The DL-AB 06-200/T-EN54 is designed with two independent speakers and 100V transformers to enable an economic operation of two separate speaker lines (A/B lines) for the highest security demands. In case of a failure of one speaker line, the redundancy of the speakers and the transformers will guarantee unimpaired function. The speaker is also compliant with the British Standard BS 5839, Part 8.

The 2x6W powered speaker is equipped with two full-range loudspeakers and two 100V transformers with 3 power adjustments, each. The powder-coated metal version with perforated grid cover in RAL 9010 guarantees lasting stability. For additional safety, a 2-pin ceramic connector block, and thermal fuses are provided and the speaker chassis are impregnated against dampness. Protection class IP 55 secures the speaker against the impact of environmental influences.

Quick and easy mounting with spring clamps and short tension distance. The connecting cables can be supplied by 4 rubber grommets in the fire dome. Special paint of the speaker in 4-digit RAL- or NCS- colour is available at extra cost. The fire dome is included in the delivery.

This speaker is suitable for a ceiling strength of about 10-45 mm. Our specification is primarily related to solid ceilings, for ceilings with soft materials higher ceiling thicknesses could be necessary. In addition, stronger cables and other fittings may also result in changes in the appropriate setup. With regard to the variety of materials and manufacturers, we recommend building a sample of the speaker to match the requirements accurately.

ic audio logo

DL-AB 06-200/T-EN54

Technical Data (Electrical)

Description DL-AB 06-200/T-EN54
Power 2x6/3/1,5 W
Impedance (100V) 2 x 1667/3333/6667 ohm
Frequency Range 162 - 18.600 Hz (single)
159 - 16.000 Hz (double)
Frequency Response 125 - 23.500 Hz (single)
120 - 23.500 Hz(double)
SPL IEC268-5, 1W/1m 89,0 dB
SPL EN54-24, Pmax/4m 85,0 dB (single)
91,0 dB (double)
Sensitivity EN54-24, 1W/4m 77,0 dB
Sensitivity EN54-24, 1W/1m 89,0 dB
Dispersion -6dB, 500Hz 180° (h) s/d
180° (v) s/d
Dispersion -6dB, 1KHz 160° (h) s/d
160° (v) s/d
Dispersion -6dB, 2KHz 120° (h) 160° (v) single
75° (h) 90° (v) double
Dispersion -6dB, 4KHz 65° (h) 120° (v) single
40° (h) 60° (v) double

Technical Data (Mechanical)

Dimensions 268x136 mm
IP Rating IP55
Weight (net) 2,16 kg
Ceiling Cut-out 243 mm
Built-in depth 135 mm
Temperature Range -10 / +55 °C
Mounting Snap system
Connector 2-pin ceramic block
Terminal Diameter 3,2 mm
Maximum Cable Passage 8 mm² (single)
Colour RAL 9010

Product Attributes

ic audio logo

DL-AB 06-200/T-EN54

Technical Drawing

ic audio logo

DL-AB 06-200/T-EN54

Frequency Response Diagram

Sensitivity
ic audio logo

DL-AB 06-200/T-EN54

Isobar

Horizontal
Vertical
ic audio logo

DL-AB 06-200/T-EN54

Polar Diagram

DL-AB 06-200/T-EN54
Polar Diagram 500Hz
DL-AB 06-200/T-EN54
Polar Diagram 1000Hz
DL-AB 06-200/T-EN54
Polar Diagram 2000Hz
DL-AB 06-200/T-EN54
Polar Diagram 4000Hz
DL-AB 06-200/T-EN54
Polar Diagram 8000Hz
ic audio logo

DL-AB 06-200/T-EN54

ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.