ic audio logo

DL-A 10-200/T-EN54

DL-A 10-200/T-EN54

DL-A 10-200/T-EN54 DL-A 10-200/T-EN54
  • unobtrusive installation
  • vandal-proof
  • BS 5839

EN 54-24:2008
Ref. Nr.: 004-13
ID-Code: SAA-LS04
1438/CPD/0232

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

The 10W powered speaker is equipped with a 200mm full-range loudspeaker chassis and a 100V transformer with 4 power adjustments. The powder-coated metal version with a perforated grid cover in RAL 9010 guarantees lasting stability. For additional reliability, a 2-pin ceramic block, and a thermal fuse are provided and the speaker chassis is impregnated against wetness. Flat and elegant design for inconspicuous installation that does not require a disturbing "collar" thanks to a metal back panel.

The speaker is also secured with protection class IP 21C against the security risks of environmental influences.

The speaker is also compliant with the British Standard BS 5839, Part 8.

Quick and easy mounting by fixing screws at the metal back plate. Special paint of the speaker in 4-digit RAL- or NCS- colour is available at extra cost.

ic audio logo

DL-A 10-200/T-EN54

Technical Data (Electrical)
Description DL-A 10-200/T-EN54
Power 10/6/3/1,5 W
Impedance (100V) 1000/1667/3333/6667 ohm
Frequency Range 275 - 19.100 Hz
Frequency Response 200 - 24.000 Hz
SPL IEC268-5, 1W/1m 95,0 dB
SPL EN54-24, Pmax/4m 92,0 dB
Sensitivity EN54-24, 1W/4m 83,0 dB
Sensitivity EN54-24, 1W/1m 95,0 dB
Dispersion -6dB, 500Hz h/v 180°
Dispersion -6dB, 1KHz h/v 170°
Dispersion -6dB, 2KHz h/v 90°
Dispersion -6dB, 4KHz h/v 50°
Please note: Because of many different types of ceiling materials and ceiling strengths we recommend to build in a sample of the speaker to match the requirements accurately.

Technical Data (Mechanical)
Dimensions 210x80 mm
IP Rating IP21
Weight (net) 1,69 kg
Temperature Range -10 / +55 C°
Mounting Screws
Connector 2-pin ceramic block
Terminal Diameter 3,2 mm
Maximum Cable Passage 8 mm²
Colour RAL 9010

Product Attributes
ic audio logo

DL-A 10-200/T-EN54

Technical Drawing

ic audio logo

DL-A 10-200/T-EN54

Frequency Response Diagram

Sensitivity
ic audio logo

DL-A 10-200/T-EN54

Isobar

ic audio logo

DL-A 10-200/T-EN54

Polar Diagram

DL-A 10-200/T-EN54
Polar Diagram 500Hz
DL-A 10-200/T-EN54
Polar Diagram 1000Hz
DL-A 10-200/T-EN54
Polar Diagram 2000Hz
DL-A 10-200/T-EN54
Polar Diagram 4000Hz
DL-A 10-200/T-EN54
Polar Diagram 8000Hz
ic audio logo

DL-A 10-200/T-EN54
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.