ic audio logo

WA 06-165/T-EN54

WA 06-165/T-EN54

WA 06-165/T-EN54
  • Softline design
  • Impact-resistant housing
  • BS 5839

EN 54-24:2008
Ref. Nr.: 007-13
ID-Code: SAA-LS07
1438-CPR-0231

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

The 6W powered speaker is equipped with a 165mm full-range loudspeaker chassis and a 100V transformer with 3 power adjustments. The high-density, shock-resistant MDF wood housing in white provides a low resonance sound. A sturdy front grille made of steel guarantees enduring stability. For additional reliability, a 2-pin ceramic block, and a thermal fuse are provided and the speaker chassis is impregnated against wetness.

The speaker is also secured with the high protection class IP 54 against the security risks of environmental influences. It is also compliant with the British Standard BS 5839, Part 8.

The proven spring snap fastener on the rear wall ensures quick wall mounting.

ic audio logo

WA 06-165/T-EN54

Technical Data (Electrical)
Description WA 06-165/T-EN54
Power 6/3/1,5 W
Impedance (100V) 1667/3333/6667 ohm
Frequency Range 197 - 21.900 Hz
Frequency Response 172 - 23.500 Hz
SPL IEC268-5, 1W/1m 93,0 dB
SPL EN54-24, Pmax/4m 90,0 dB
Sensitivity EN54-24, 1W/4m 81,0 dB
Sensitivity EN54-24, 1W/1m 93,0 dB
Dispersion -6dB, 500Hz h=180° v=180°
Dispersion -6dB, 1KHz h=160° v=160°
Dispersion -6dB, 2KHz h=125° v=125°
Dispersion -6dB, 4KHz h=89° v=89°

Technical Data (Mechanical)
Dimensions 253x194x82 mm
IP Rating IP54
Weight (net) 1,95 kg
Temperature range -10 / +55 C°
Mounting spring clamp
Connector 2-pin ceramic block
Terminal diameter 3,2 mm
Maximum cable passage 8 mm²
Colour white

Product Attributes
ic audio logo

WA 06-165/T-EN54

Technical Drawing

ic audio logo

WA 06-165/T-EN54

Frequency Response Diagram

Sensitivity
SPL Max
ic audio logo

WA 06-165/T-EN54

Isobar

Horizontal
Vertical
ic audio logo

WA 06-165/T-EN54

Polar Diagram

WA 06-165/T-EN54
Polar Diagram 500Hz
WA 06-165/T-EN54
Polar Diagram 1000Hz
WA 06-165/T-EN54
Polar Diagram 2000Hz
WA 06-165/T-EN54
Polar Diagram 4000Hz
WA 06-165/T-EN54
Polar Diagram 8000Hz
ic audio logo

WA 06-165/T-EN54
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.