ic audio logo

DA 10-130/T-EN54

DA 10-130/T-EN54

DA 10-130/T-EN54
  • vandal-proof
  • aluminium housing
  • BS 5839

EN 54-24:2008
Ref. Nr.: 003-14
ID-Code: SAA-LS14
1438-CPR-1000

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

The 10W powered speaker is equipped with a 130mm full-range loudspeaker and a 100V line transformer with 4 power adjustments. A robust powder-coated aluminium housing in RAL 9010, and vandal-resistant feet ensure a permanent installation of this speaker. For additional reliability, a 2-pin ceramic block and a thermal fuse are provided and the speaker chassis is impregnated against wetness.

The speaker is also secured with the high protection class IP 65 against the risks of environmental influences.

Perfectly suitable for installation in corridors and hallways. The speaker is compliant with the British Standard BS 5839, Part 8.

ic audio logo

DA 10-130/T-EN54

Technical Data (Electrical)
Description DA 10-130/T-EN54
Power 10/6/3/1,5 W
Impedance (100V) 1000/1667/3333/6667 ohm
Frequency Range 200 - 22.200 Hz
Frequency Response 150 - 23.500 Hz
SPL IEC268-5, 1W/1m 93,0 dB
SPL EN54-24, Pmax/4m 90,0 dB
Sensitivity EN54-24, 1W/4m 81,0 dB
Sensitivity EN54-24, 1W/1m 90,9 dB
Dispersion -6dB, 500Hz h/v 360°
Dispersion -6dB, 1KHz h/v 230°
Dispersion -6dB, 2KHz h/v 120°
Dispersion -6dB, 4KHz h/v 50°

Technical Data (Mechanical)
Dimensions 161x197x166 mm
IP Rating IP65
Weight (net) 1,84 kg
Temperature Range -25 / +70 C°
Mounting screws
Connector 2-pin ceramic block
Terminal Diameter 3,2 mm
Maximum Cable Passage 8 mm²
Colour RAL 9010

Product Attributes
ic audio logo

DA 10-130/T-EN54

Technical Drawing

ic audio logo

DA 10-130/T-EN54

Frequency Response Diagram

Sensitivity
ic audio logo

DA 10-130/T-EN54

Isobar

ic audio logo

DA 10-130/T-EN54

Polar Diagram

DA 10-130/T-EN54
Polar Diagram 500Hz
DA 10-130/T-EN54
Polar Diagram 1000Hz
DA 10-130/T-EN54
Polar Diagram 2000Hz
DA 10-130/T-EN54
Polar Diagram 4000Hz
DA 10-130/T-EN54
Polar Diagram 8000Hz
ic audio logo

DA 10-130/T-EN54
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.