ic audio logo

DL-BR 15-130/T plus-EN54

DL-BR 15-130/T plus-EN54

DL-BR 15-130/T plus-EN54
  • bass-reflex
  • quick mounting
  • impact-resistant ABS

EN 54-24:2008
Ref. Nr.: 006-14
ID-Code: SAA-LS15
1438-CPR-0435

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

The 15W powered speaker is equipped with a 130mm 2-way bass-reflex system with a neodymium tweeter and a 100V transformer with 4 power adjustments. Low-impedance operation is also possible. The impact-resistant ABS housing in RAL 9016 guarantees long-term stability. For additional reliability, a thermal fuse and a strain relief fitting are provided.

The speaker is also protected against the risks of environmental influences with protection class IP 21C and the speaker chassis is impregnated against wetness. Quick and uncomplicated screw mounting, the connection is made via a sturdy 4-pole screw terminal.

Thanks to modern 2-way technology, particularly suitable for installations with demanding sound quality.

ic audio logo

DL-BR 15-130/T plus-EN54

Technical Data (Electrical)
Description DL-BR 15-130/T plus-EN54
Power 15 / 7,5 / 3,75 / 1,9 (8) W
Impedance (100V) 667/1333/2667/5263 ohm
Frequency Range 100 - 22.800 Hz
Frequency Response 87 - 23.600 Hz
SPL IEC268-5, 1W/1m 86,0 dB
SPL EN54-24, Pmax/4m 90 dB
Sensitivity EN54-24, 1W/4m 74,2 dB
Sensitivity EN54-24, 1W/1m 86,2 dB
Dispersion -6dB, 500Hz h/v 180°
Dispersion -6dB, 1KHz h/v 180°
Dispersion -6dB, 2KHz h/v 145°
Dispersion -6dB, 4KHz h/v 95°

Technical Data (Mechanical)
Dimensions 213 x 152 mm
IP Rating IP21
Weight (net) 1,73 kg
Ceiling Cut-out 178 mm
Temperature Range -10 / +55 C°
Mounting Quick-mount clamps
Connector 4-pin screw terminal
Terminal Diameter 2,5 mm
Maximum Cable Passage 4,9 mm²
Colour RAL 9016

Product Attributes
ic audio logo

DL-BR 15-130/T plus-EN54

Technical Drawing

ic audio logo

DL-BR 15-130/T plus-EN54

Frequency Response Diagram

Sensitivity
ic audio logo

DL-BR 15-130/T plus-EN54

Isobar

ic audio logo

DL-BR 15-130/T plus-EN54

Polar Diagram

DL-BR 15-130/T plus-EN54
Polar Diagram 500Hz
DL-BR 15-130/T plus-EN54
Polar Diagram 1000Hz
DL-BR 15-130/T plus-EN54
Polar Diagram 2000Hz
DL-BR 15-130/T plus-EN54
Polar Diagram 4000Hz
DL-BR 15-130/T plus-EN54
Polar Diagram 8000Hz
ic audio logo

DL-BR 15-130/T plus-EN54
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.