ic audio logo

DL-S 10-130/T plus-EN54

DL-S 10-130/T plus-EN54

DL-S 10-130/T plus-EN54 DL-S 10-130/T plus-EN54
  • 2-way system
  • thermal fuse
  • magnetic fastening of grille

EN 54-24:2008
Ref. Nr.: 018-15
ID-Code: SAA-LS18
1438-CPR-0431

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

2-Way-Ceiling speaker with fire dome for voice alarm applications certified EN 54-24, suitable for voice announcements and background music with excellent sound quality in buildings. The 10W powered speaker is equipped with a 130mm 2-way system with a high-quality tweeter and a 100V transformer with 4 power adjustments. Low-impedance operation is also possible. The impact-resistant plastic housing in RAL 9016 guarantees long-term stability. A thermal fuse provides additional safety.

Thanks to an innovative magnetic fastening, the finely perforated speaker grille can quickly be removed or replaced by a grille with a different colour, even after the installation.

Protection class IP 21C secures the speaker against the impact of environmental influences. The speaker chassis is impregnated against dampness. Easy installation via the screw mounting system.

ic audio logo

DL-S 10-130/T plus-EN54

Technical Data (Electrical)
Description DL-S 10-130/T plus-EN54
Power 10/5/2.5 (8) W
Impedance (100V) 1000/2000/4000 ohm
Frequency Range 104 - 22.700 Hz
Frequency Response 111 - 21.600 Hz
SPL IEC268-5, 1W/1m 87,0 dB
SPL EN54-24, Pmax/4m 88,0 dB
Sensitivity EN54-24, 1W/4m 75,8 dB
Sensitivity EN54-24, 1W/1m 87,8 dB
Dispersion -6dB, 500Hz h/v 180°
Dispersion -6dB, 1KHz h/v 180°
Dispersion -6dB, 2KHz h/v 110°
Dispersion -6dB, 4KHz h/v 72°

Technical Data (Mechanical)
Dimensions 216,5 x 141 mm
IP Rating IP21
Weight (net) 1,70 kg
Ceiling Cut-out 186 mm
Temperature Range -10 / +55 °C
Mounting Screw system
Connector 5-pin screw terminal
Terminal Diameter 2,5 mm
Maximum Cable Passage 4,9 mm²
Colour RAL 9016

Product Attributes
ic audio logo

DL-S 10-130/T plus-EN54

Technical Drawing

ic audio logo

DL-S 10-130/T plus-EN54

Frequency Response Diagram

Sensitivity
ic audio logo

DL-S 10-130/T plus-EN54

Isobar

ic audio logo

DL-S 10-130/T plus-EN54

Polar Diagram

DL-S 10-130/T plus-EN54
Polar Diagram 500Hz
DL-S 10-130/T plus-EN54
Polar Diagram 1000Hz
DL-S 10-130/T plus-EN54
Polar Diagram 2000Hz
DL-S 10-130/T plus-EN54
Polar Diagram 4000Hz
DL-S 10-130/T plus-EN54
Polar Diagram 8000Hz
ic audio logo

DL-S 10-130/T plus-EN54
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.