ic audio logo

DL-SE 06-165/T-EN54

DL-SE 06-165/T-EN54

DL-SE 06-165/T-EN54 DL-SE 06-165/T-EN54
  • frameless design
  • suitable also for very thin ceilings
  • WAGO connector 221

EN 54-24:2008
Ref. Nr.: 001-18
ID-Code: SAA-1801
1438-CPR-0642

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

The frameless design of the new ceiling speakers is inspired by current LED lights and already has the makings of a classic. The 6W powered speaker is equipped with a 165mm full-range loudspeaker and a 100V transformer with 3 power adjustments. The powder-coated metal in RAL 9016 guarantees long-term stability. For additional reliability, the speaker is impregnated against wetness.

The speaker is also secured with protection class IP 21C against the security risks of environmental influences. Fast and easy installation by WAGO 221 connector and strong spring clamps with protective caps for vibration damping. Alternatively, the loudspeaker can also be mounted using a threaded rod (M6 thread). The connecting cables can be supplied by rubber grommets in the fire dome.

Special paint of the speaker in 4-digit RAL- or NCS- colour is available at extra cost. The fire dome is included in the delivery.

This speaker is suitable for a ceiling strength of about 1-45 mm. Our specification is primarily related to solid ceilings, for ceilings with soft materials higher ceiling thicknesses could be necessary. In addition, stronger cables and other fittings may also result in changes in the appropriate setup. With regard to the variety of materials and manufacturers, we recommend building a sample of the speaker to match the requirements accurately.

ic audio logo

DL-SE 06-165/T-EN54

Technical Data (Electrical)
Description DL-SE 06-165/T-EN54
Power 6/3/1,5 W
Impedance (100V) 1667/3333/6667 ohm
Frequency Range 63 - 16.000 Hz
Frequency Response 56 - 18.000 Hz
SPL IEC268-5, 1W/1m 92,0 dB
SPL EN54-24, Pmax/4m 87,0 dB
Sensitivity EN54-24, 1W/4m 80,0 dB
Sensitivity EN54-24, 1W/1m 92,0 dB
Dispersion -6dB, 500Hz h/v 180°
Dispersion -6dB, 1KHz h/v 175°
Dispersion -6dB, 2KHz h/v 150°
Dispersion -6dB, 4KHz h/v 90°

Technical Data (Mechanical)
Dimensions 220x107 mm
IP Rating IP21
Weight (net) 1,4 kg
Ceiling Cut-out 188 mm
Temperature Range -10 / +55 °C
Mounting spring clamp
Connector WAGO 221 connector
Terminal Diameter 2,3 mm
Maximum Cable Passage 4 mm²
Colour RAL 9016

Product Attributes
ic audio logo

DL-SE 06-165/T-EN54

Technical Drawing

ic audio logo

DL-SE 06-165/T-EN54

Frequency Response Diagram

Sensitivity
ic audio logo

DL-SE 06-165/T-EN54

Isobar

ic audio logo

DL-SE 06-165/T-EN54

Polar Diagram

DL-SE 06-165/T-EN54
Polar Diagram 500Hz
DL-SE 06-165/T-EN54
Polar Diagram 1000Hz
DL-SE 06-165/T-EN54
Polar Diagram 2000Hz
DL-SE 06-165/T-EN54
Polar Diagram 4000Hz
DL-SE 06-165/T-EN54
Polar Diagram 8000Hz
ic audio logo

DL-SE 06-165/T-EN54
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.