ic audio logo

DL 06-165/T-EN54W

DL 06-165/T-EN54W

DL 06-165/T-EN54W DL 06-165/T-EN54W
  • quick mounting
  • shock-resistant housing
  • WAGO 221 connector

EN 54-24:2008
Ref. Nr.: 010-18
ID-Code: SAA-LS01
1438-CPR-0233

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

The 6W powered speaker is equipped with a 165mm full-range loudspeaker chassis and a 100V transformer with 3 power adjustments. The powder-coated metal similar to RAL 9010 guarantees long-term stability. For additional reliability, the speaker chassis are impregnated against wetness. Fast and easy installation by WAGO 221 connector.

The speaker is also secured with protection class IP 21C against the security risks of environmental influences. Quick and easy mounting with spring clamps and short tension distance. The connecting cables can be supplied by rubber grommets in the fire dome.

Special paint of the speaker in 4-digit RAL- or NCS-colour is available at extra cost.

The fire dome is included in the delivery.

This speaker is suitable for a ceiling strength of about 2-45 mm. Our specification is primarily related to solid ceilings, for ceilings with soft materials higher ceiling thicknesses could be necessary. In addition, stronger cables and other fittings may also result in changes in the appropriate setup. With regard to the variety of materials and manufacturers, we recommend building a sample of the speaker to match the requirements accurately.

ic audio logo

DL 06-165/T-EN54W

Technical Data (Electrical)
Description DL 06-165/T-EN54W
Power 6/3/1,5 W
Impedance (100V) 1667/3333/6667 ohm
Frequency Range 404 - 10.100 Hz
Frequency Response 80 - 24.000 Hz
Sensitivity EN54-24, 1W/4m 81,0 dB
Dispersion -6dB, 500Hz 180°
Dispersion -6dB, 1KHz 175°
Dispersion -6dB, 2KHz 100°
Dispersion -6dB, 4KHz 50°

Technical Data (Mechanical)
Dimensions 220x112 mm
IP Rating IP21
Weight (net) 1,30 kg
Ceiling Cut-out 198 mm
Temperature range - 20 / +80 °C
Mounting Quick fit mounting
Connector WAGO 221 connector
Terminal diameter 2,3 mm
Maximum cable passage 4 mm²
Colour RAL 9010

Product Attributes
ic audio logo

DL 06-165/T-EN54W

Technical Drawing

ic audio logo

DL 06-165/T-EN54W

Frequency Response Diagram

Sensitivity
SPL Max
ic audio logo

DL 06-165/T-EN54W

Isobar

ic audio logo

DL 06-165/T-EN54W

Polar Diagram

DL 06-165/T-EN54W
Polar Diagram 500Hz
DL 06-165/T-EN54W
Polar Diagram 1000Hz
DL 06-165/T-EN54W
Polar Diagram 2000Hz
DL 06-165/T-EN54W
Polar Diagram 4000Hz
DL 06-165/T-EN54W
Polar Diagram 8000Hz
ic audio logo

DL 06-165/T-EN54W
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.