ic audio logo

WA-AB 06-100/T-EN54W

WA-AB 06-100/T-EN54W

WA-AB 06-100/T-EN54W WA-AB 06-100/T-EN54W
  • quick mounting
  • highest reliability
  • WAGO 221 connector

EN 54-24:2008
Ref. Nr.: 008-18
ID-Code: SAA-LS08
1438-CPR-0230

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

The WA-AB 06-100/T-EN54W is designed with two independent speakers and 100V transformers to enable the economic operation of two separate speaker lines (A/B lines) for the highest security demands. In case of a failure of one speaker line, the redundancy of the chassis and the transformers will guarantee unimpaired function. 

The 2x6W powered speaker is equipped with two full-range loudspeakers and two 100V transformers with 3 power adjustments, each. The high-density, shock-resistant MDF wood housing in white provides a low resonance sound. A sturdy front grille made of steel guarantees enduring stability. For additional reliability, the speaker chassis are impregnated against wetness. Fast and easy installation by WAGO 221 connector.

The speaker is also secured with the high protection class IP 54 against the security risks of environmental influences. The reliable spring clamp on the rear plate ensures quick mounting on walls.

ic audio logo

WA-AB 06-100/T-EN54W

Technical Data (Electrical)
Description WA-AB 06-100/T-EN54W
Power 2x 6/3/1,5 W
Impedance (100V) 2 x 1667/3333/6667 ohm
Frequency Range 227 - 14.600 Hz (single)
224 - 14.300 Hz (double)
Frequency Response 165 - 23.500 Hz (single)
162 - 23.500 Hz (double)
Sensitivity EN54-24, 1W/4m 77,5 dB (single)
80,6 dB (double)
Dispersion -6dB, 500Hz 180 (h) s/d
180 (v) s/d
Dispersion -6dB, 1KHz 64/80 (h) s/d
55/77 (v) s/d
Dispersion -6dB, 2KHz 123/86 (h) s/d
117/62 (v) s/d
Dispersion -6dB, 4KHz 105/32 (h) s/d
52/26 (v) s/d

Technical Data (Mechanical)
Dimensions 254x195x81 mm
IP Rating IP54
Weight (net) 2,10 kg
Temperature Range - 20 / +80 °C
Mounting spring clamp
Connector WAGO 221 connector
Terminal Diameter 2,3 mm
Maximum Cable Passage 4mm² (single)
Colour white

Product Attributes
ic audio logo

WA-AB 06-100/T-EN54W

Technical Drawing

ic audio logo

WA-AB 06-100/T-EN54W

Frequency Response Diagram

Sensitivity
ic audio logo

WA-AB 06-100/T-EN54W

Isobar

Horizontal
Vertical
ic audio logo

WA-AB 06-100/T-EN54W

Polar Diagram

WA-AB 06-100/T-EN54W
Polar Diagram 500Hz
WA-AB 06-100/T-EN54W
Polar Diagram 1000Hz
WA-AB 06-100/T-EN54W
Polar Diagram 2000Hz
WA-AB 06-100/T-EN54W
Polar Diagram 4000Hz
WA-AB 06-100/T-EN54W
Polar Diagram 8000Hz
ic audio logo

WA-AB 06-100/T-EN54W
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.