ic audio logo

DA-P 10-130/T-EN54

DA-P 10-130/T-EN54

DA-P 10-130/T-EN54
  • quick mounting
  • high-impact ABS plastic
  • BS 5839

EN 54-24:2008
Ref. Nr.: 021-18
ID-Code: SAA-LS21
1438-CPR-0388

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

The 10W powered speaker is equipped with a 130mm full-range loudspeaker and a 100V line transformer with 4 power adjustments. A robust ABS plastic housing in RAL9016 and a solid aluminium mounting bracket ensure an enduring installation of this speaker.

A 2 pin-ceramic block and a thermal fuse in a junction box provide additional reliability. The speaker chassis is impregnated against wetness.

The speaker is compliant with the British Standard BS 5839, Part 8.

A mast bracket (MB) is optionally available for a 90-200 mm mast diameter.

ic audio logo

DA-P 10-130/T-EN54

Technical Data (Electrical)
Description DA-P 10-130/T-EN54
Power 10/5/2,5/1,25 W
Impedance (100V) 1000/2000/4000/8000 ohm
Frequency Range 150 - 20.000 Hz
Frequency Response 120 - 21.000 Hz
SPL IEC268-5, 1W/1m 87,0 dB
SPL EN54-24, Pmax/4m 86,0 dB
Sensitivity EN54-24, 1W/4m 75,0 dB
Dispersion -6dB, 500Hz 360°
Dispersion -6dB, 1KHz 252°
Dispersion -6dB, 2KHz 110°
Dispersion -6dB, 4KHz 58°

Technical Data (Mechanical)
Dimensions 137x 200mm
IP Rating IP66
Weight (net) 1,44kg
Temperature range -25 / +70 C°
Mounting Mounting bracket
Connector 2-pin ceramic block
Terminal diameter 3,2 mm
Maximum cable passage 8mm²
Colour RAL9016

Product Attributes
ic audio logo

DA-P 10-130/T-EN54

Technical Drawing

ic audio logo

DA-P 10-130/T-EN54

Frequency Response Diagram

Sensitivity
SPL Max
ic audio logo

DA-P 10-130/T-EN54

Isobar

ic audio logo

DA-P 10-130/T-EN54

Polar Diagram

DA-P 10-130/T-EN54
Polar Diagram 500Hz
DA-P 10-130/T-EN54
Polar Diagram 1000Hz
DA-P 10-130/T-EN54
Polar Diagram 2000Hz
DA-P 10-130/T-EN54
Polar Diagram 4000Hz
DA-P 10-130/T-EN54
Polar Diagram 8000Hz
ic audio logo

DA-P 10-130/T-EN54
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.