ic audio logo

WA 10-165/T Metal-EN54

WA 10-165/T Metal-EN54

WA 10-165/T Metal-EN54 WA 10-165/T Metal-EN54
  • All-metal construction
  • Vandal-proof
  • BS 5839

EN 54-24:2008
Ref. Nr.: 007-13
ID-Code: SAA-LS07
1438-CPR-0231

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

This speaker is the best choice for sensitive installations like prisons or industrial areas where plastic and wooden materials are not an option.

The 10W powered speaker is equipped with a 165mm full-range loudspeaker chassis and a 100V transformer with 4 power adjustments. The extremely stable metal housing in RAL 9010 with corrosion-resistant powder coating, offers tremendous resilience paired with an unobtrusive design.

A 2-pin ceramic block and a thermal fuse provide additional reliability. The speaker chassis is impregnated against wetness.

The speaker is secured with protection class IP 21C against the risks of environmental influences. It is also compliant with the British Standard BS 5839, Part 8.

Quick and easy screw mounting.

ic audio logo

WA 10-165/T Metal-EN54

Technical Data (Electrical)
Description WA 10-165/T Metal-EN54
Power 10/6/3/1,5 W
Impedance (100V) 1000/1667/3333/6667 ohm
Frequency Range 170 - 18.500 Hz
Frequency Response 70 - 23.500 Hz
SPL IEC268-5, 1W/1m 94,0 dB
SPL EN54-24, Pmax/4m 89,0 dB
Sensitivity EN54-24, 1W/4m 80,0 dB
Dispersion -6dB, 500Hz h=180° v=180°
Dispersion -6dB, 1KHz h=160° v=160°
Dispersion -6dB, 2KHz h=100° v=100°
Dispersion -6dB, 4KHz h=76° v=76°

Technical Data (Mechanical)
Dimensions 252x192x81 mm
IP Rating IP21
Weight (net) 2,20 kg
Temperature Range -10 / +55 °C
Mounting Screws
Connector 2-pin ceramic block
Terminal Diameter 3,2 mm
Maximum Cable Passage 8 mm²
Colour RAL 9010

Product Attributes
ic audio logo

WA 10-165/T Metal-EN54

Technical Drawing

ic audio logo

WA 10-165/T Metal-EN54

Frequency Response Diagram

Sensitivity
ic audio logo

WA 10-165/T Metal-EN54

Isobar

Horizontal
Vertical
ic audio logo

WA 10-165/T Metal-EN54

Polar Diagram

WA 10-165/T Metal-EN54
Polar Diagram 500Hz
WA 10-165/T Metal-EN54
Polar Diagram 1000Hz
WA 10-165/T Metal-EN54
Polar Diagram 2000Hz
WA 10-165/T Metal-EN54
Polar Diagram 4000Hz
WA 10-165/T Metal-EN54
Polar Diagram 8000Hz
ic audio logo

WA 10-165/T Metal-EN54
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.