ic audio logo

DK 30/T-EN54-PG

DK 30/T-EN54-PG

DK 30/T-EN54-PG DK 30/T-EN54-PG
  • High sound pressure level
  • Weather-proof
  • BS 5839

EN 54-24:2008
Ref. Nr.: 003-13
ID-Code: SAA-LS03
1438-CPR-0242

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

The 30W powered speaker is equipped with a 100V line transformer with 4 power adjustments, also low-impedance operation (20 ohms) is possible. The impact-resistant ABS housing UL94V0 in RAL 7035 guarantees long-term stability. For additional reliability, a ceramic block and a thermal fuse are provided.

The speaker is also secured with the high protection class IP 66 against the security risks of environmental influences. The speaker is compliant with the British Standard BS 5839, Part 8.
The PG11 cable glands on the back of the speaker allow quick and easy connection.

Included is a U-shaped, stainless steel universal mount for flexible installation. Optionally available is a mast bracket (MB) for approx. 90-200 mm mast diameter.

To operate the product according to EN 54-24, an equalizer has to be used as described in the user manual.

ic audio logo

DK 30/T-EN54-PG

Technical Data (Electrical)
Description DK 30/T-EN54-PG
Power 30/20/10/5 (20) W
Impedance (100V) 333/500/1000/2000 ohm
Frequency Range 592 - 6.900 Hz
Frequency Response 250 - 15.000 Hz
SPL IEC268-5, 1W/1m 97,0 dB
SPL EN54-24, Pmax/4m 96,0 dB
Sensitivity EN54-24, 1W/4m 85,0 dB
Sensitivity EN54-24, 1W/1m 97,9 dB
Dispersion -6dB, 500Hz h/v 155°
Dispersion -6dB, 1KHz h/v 110°
Dispersion -6dB, 2KHz h/v 65°
Dispersion -6dB, 4KHz h/v 35°

Technical Data (Mechanical)
Dimensions 235x351 mm
IP Rating IP66
Weight (net) 2,27 kg
Temperature range -25 / +70 C°
Mounting Mounting bracket
Connector ceramic block
Terminal diameter 3,2 mm
Maximum cable passage 8 mm²
Colour RAL 7035

Product Attributes
ic audio logo

DK 30/T-EN54-PG

Technical Drawing

ic audio logo

DK 30/T-EN54-PG

Frequency Response Diagram

Sensitivity
SPL Max
ic audio logo

DK 30/T-EN54-PG

Isobar

ic audio logo

DK 30/T-EN54-PG

Polar Diagram

DK 30/T-EN54-PG
Polar Diagram 500Hz
DK 30/T-EN54-PG
Polar Diagram 1000Hz
DK 30/T-EN54-PG
Polar Diagram 2000Hz
DK 30/T-EN54-PG
Polar Diagram 4000Hz
DK 30/T-EN54-PG
Polar Diagram 8000Hz
ic audio logo

DK 30/T-EN54-PG
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.