ic audio logo

DS 100/T plus-EN54 Line Array

DS 100/T plus-EN54 Line Array

DS 100/T plus-EN54 Line Array DS 100/T plus-EN54 Line Array
  • Waveguide Technology
  • Adjustable steel bracket
  • IP66

EN 54-24:2008
Ref. Nr.: 021-09
ID-Code: SAA-LS26
1438-CPR-0983

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

The DS 100/T plus-EN54 line array combines the strengths of the DS 100/T plus-EN54 into a loudspeaker system that is able to cover even larger areas with excellent speech intelligibility, certified according to EN54-24. The compact line array consists of 4 modules in a steel bracket, each of which can be adjusted in 3 vertical steps of 0, 5, 10 and 15 degrees. This makes it adaptable to all acoustic challenges, indoors and outdoors. The loudspeaker is weatherproof with an IP66 protection rating. A safety rope is included in the delivery.

The attractive design of the impact-resistant ABS housing with an aluminium grille is available in white. Each of the 100W speakers is equipped with two 4" performance mid-bass woofers, a 2-way bass reflex system and a high-performance tweeter including a waveguide in D'Appolito arrangement.

A tweeter switch provides a 4dB boost for possible sound correction in near-wall and near-ceiling installations. Each loudspeaker offers 4 different 100V power adjustments, and low-impedance operation is also possible. The connection is made via screw terminals for cable cross-sections up to 4 mm², and the feed line into the enclosure via a PG11 cable gland in the cover plate.

These loudspeakers are also available individually including a mounting bracket.

ic audio logo

DS 100/T plus-EN54 Line Array

Technical Data (Electrical)
Description DS 100/T plus-EN54 Line Array
Power 4x 100/50 /25 W
Impedance (100V) 4x 100/200 /400/ or 1x4 ohm
Frequency Range 56 - 20.500 Hz (Tweeter 0dB)
Frequency Response 50 - 22.000 Hz (Tweeter 0dB)
SPL IEC268-5, 1W/1m 97 dB
SPL EN54-24, Pmax/4m 107,5 dB
Sensitivity EN54-24, 1W/4m 80 dB
Sensitivity EN54-24, 1W/1m 92 dB
Dispersion -6dB, 500Hz 182° (h)
62° (v)
Dispersion -6dB, 1KHz 78° (h)
30° (v)
Dispersion -6dB, 2KHz 82° (h)
11° (v)
Dispersion -6dB, 4KHz 175° (h)
10° (v)

Technical Data (Mechanical)
Dimensions 0°: 341x852x274 / 45°: 341x765x430
IP Rating IP66
Weight (net) 30 kg
Mounting Mounting bracket
Connector Screw terminal
Terminal diameter 2,3 mm
Maximum cable passage 4 mm²
Colour white

Product Attributes
ic audio logo

DS 100/T plus-EN54 Line Array

Technical Drawing

ic audio logo

DS 100/T plus-EN54 Line Array

Frequency Response Diagram

Sensitivity
SPL Max
ic audio logo

DS 100/T plus-EN54 Line Array

Isobar

Horizontal
Vertical
ic audio logo

DS 100/T plus-EN54 Line Array

Polar Diagram

DS 100/T plus-EN54 Line Array
Polar Diagram 500Hz
DS 100/T plus-EN54 Line Array
Polar Diagram 1000Hz
DS 100/T plus-EN54 Line Array
Polar Diagram 2000Hz
DS 100/T plus-EN54 Line Array
Polar Diagram 4000Hz
DS 100/T plus-EN54 Line Array
Polar Diagram 8000Hz
ic audio logo

DS 100/T plus-EN54 Line Array
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.