ic audio logo

WA-S 06-100/T-EN54

WA-S 06-100/T-EN54

WA-S 06-100/T-EN54 WA-S 06-100/T-EN54
  • high sound pressure level
  • frameless design
  • flexible mounting

EN 54-24:2008
Ref. Nr.: 002-23
ID-Code: SAA-LS02
1438-CPR-0984

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

A uniquely designed ultra-slim wall speaker for limited space and unobtrusive installations. The WA-S 06-100/T-EN54 delivers excellent sound quality with an outstanding look.

The 6W full range 100mm speaker convinces through high-quality design and resilience. The impact-resistant, UV-resistant, ABS plastic housing in white assures enduring stability. It features a magnetically attached grille – discreet and easy maintenance.

Fast and easy installation through the ceramic block and thermal fuse.

The speaker is protected against the risks of environmental influences with protection class IP 21. It is also impregnated against moisture.

Thanks to its flexible mounting positions, 3 orientations are possible:

  1. Horizontal alignment on the wall
  2. Horizontal alignment between two walls and the ceiling
  3. Corner mount
ic audio logo

WA-S 06-100/T-EN54

Technical Data (Electrical)
Description WA-S 06-100/T-EN54
Power 6/3 /1.5 W
Impedance (100V) 1667/3333 /6667 ohm
Frequency Range 315 - 15.500 Hz
Frequency Response 185 - 17.500 Hz
SPL IEC268-5, 1W/1m 91,8 dB
SPL EN54-24, Pmax/4m 84,9 dB
Sensitivity EN54-24, 1W/4m 80,3 dB
Sensitivity EN54-24, 1W/1m 92,3 dB
Dispersion -6dB, 500Hz 360°
360°
Dispersion -6dB, 1KHz 150°
265°
Dispersion -6dB, 2KHz 110°
100°
Dispersion -6dB, 4KHz 102°
102°

Technical Data (Mechanical)
Dimensions 225x150x45 mm
IP Rating IP21
Weight (net) 0,61 kg
Temperature range -10 / +55 C°
Mounting screws
Connector ceramic block
Terminal diameter 2,3 mm
Maximum cable passage 4 mm²
Colour white

Product Attributes
ic audio logo

WA-S 06-100/T-EN54

Technical Drawing

ic audio logo

WA-S 06-100/T-EN54

Frequency Response Diagram

Sensitivity
SPL Max
ic audio logo

WA-S 06-100/T-EN54

Isobar

ic audio logo

WA-S 06-100/T-EN54

Polar Diagram

WA-S 06-100/T-EN54
Polar Diagram 500Hz
WA-S 06-100/T-EN54
Polar Diagram 1000Hz
WA-S 06-100/T-EN54
Polar Diagram 2000Hz
WA-S 06-100/T-EN54
Polar Diagram 4000Hz
WA-S 06-100/T-EN54
Polar Diagram 8000Hz
ic audio logo

WA-S 06-100/T-EN54
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.