ic audio logo

DL-E 06-130/T-EN54-C

DL-E 06-130/T-EN54-C

DL-E 06-130/T-EN54-C DL-E 06-130/T-EN54-C
  • high sound pressure level
  • low mounting depth
  • antistatic plastic contact protection

EN 54-24:2008
Ref. Nr.: 012-13
ID-Code: SAA-LS12
1438-CPR-0347

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

The 6W powered speaker is equipped with a 130mm full-range loudspeaker, a 100V transformer with 3 power adjustments and a DC blocking capacitor (1µF, 250V). The powder-coated metal version in RAL 9016 guarantees lasting stability. Thanks to an innovative airflow system, the DL-E provides sound characteristics which are attributed to a conventional bass speaker. An extremely flat construction method allows a low mounting depth of only 70mm, with less than 1 kg product weight. For additional reliability, the speaker is impregnated against wetness.

The speaker is also secured with protection class IP 21C against the security risks of environmental influences. Quick and easy mounting with spring clamps and short tension distance. Perfectly suitable for installations where the installation depth is very limited.

Special paint of the speaker in 4-digit RAL- or NCS-colour is available at extra cost.

The innovative PET-plastic contact protection is included in the delivery and protected by a European patent (publication no. 2768238). 

This speaker is suitable for a ceiling strength of about 3-45 mm. Our specification is primarily related to solid ceilings, for ceilings with soft materials higher ceiling thicknesses could be necessary. In addition, stronger cables and other fittings may also result in changes in the appropriate setup. With regard to the variety of materials and manufacturers, we recommend building a sample of the speaker to match the requirements accurately.

ic audio logo

DL-E 06-130/T-EN54-C

Technical Data (Electrical)
Description DL-E 06-130/T-EN54-C
Power 6/3/1,5 W
Impedance (100V) 1667/3333/6667 ohm
Frequency Range 104 - 17.200 Hz
Frequency Response 57 - 24.000 Hz
SPL IEC268-5, 1W/1m 87,0 dB (plastic)
86,0 dB (metal)
SPL EN54-24, Pmax/4m 85,0 dB
Sensitivity EN54-24, 1W/4m 74,8 dB (plastic)
74,2 dB (metal)
Sensitivity EN54-24, 1W/1m 86,8 dB
Dispersion -6dB, 500Hz plastic/metal 180°
Dispersion -6dB, 1KHz plastic/metal 180°
Dispersion -6dB, 2KHz plastic/metal 140°
Dispersion -6dB, 4KHz plastic/metal 85°/84°

Technical Data (Mechanical)
Dimensions 181,5x65 mm (plastic)
181,5x91,5 mm (metal)
IP Rating IP21
Weight (net) 0,51 kg (plastic)
0,71 kg (metal)
Ceiling Cut-out 156 mm
Temperature Range -10 / +55 C°
Mounting spring clamp
Connector 4-pin screw terminal
Terminal Diameter 2,5 mm
Maximum Cable Passage 4,9 mm²
Colour RAL 9016

Product Attributes
ic audio logo

DL-E 06-130/T-EN54-C

Technical Drawing

ic audio logo

DL-E 06-130/T-EN54-C

Frequency Response Diagram

Sensitivity
ic audio logo

DL-E 06-130/T-EN54-C

Isobar

ic audio logo

DL-E 06-130/T-EN54-C

Polar Diagram

DL-E 06-130/T-EN54-C
Polar Diagram 500Hz
DL-E 06-130/T-EN54-C
Polar Diagram 1000Hz
DL-E 06-130/T-EN54-C
Polar Diagram 2000Hz
DL-E 06-130/T-EN54-C
Polar Diagram 4000Hz
DL-E 06-130/T-EN54-C
Polar Diagram 8000Hz
ic audio logo

DL-E 06-130/T-EN54-C
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.