ic audio logo

DL-S 15-100/T plus-EN54

DL-S 15-100/T plus-EN54

DL-S 15-100/T plus-EN54 DL-S 15-100/T plus-EN54
  • bass-reflex
  • shallow installation depth
  • magnetic grille

EN 54-24:2008
Ref. Nr.: 000-00
ID-Code: XXXX-XX00

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

With a low-profile design, the DL-S voice alarm loudspeaker series, certified EN 54-24, blends seamlessly into any environment.

With a powerful 2-way bass-reflex system and an impressive 15W of power, the DL-S 15 sets new standards for clear and powerful sound. The 100mm woofer of high-quality polypropylene and the precise 25mm tweeter guarantee excellent music reproduction.

The loudspeaker offers a wide dispersion behaviour, filling the room with exceptional sound. Connection options are convenient via the screw terminal with IN-OUT for loop connections, while power adjustments via a rotary switch enable individual sound customisation.

This speaker offers the flexibility of low-impedance operation, allowing it to be optimised for different requirements. The magnetic grille and screw mounting system simplify installation and ensure an elegant appearance.

The speaker's housing, made of high-quality ABS plastic, not only promises long-lasting performance but also blends aesthetically into any environment.

ic audio logo

DL-S 15-100/T plus-EN54

Technical Data (Electrical)
Description DL-S 15-100/T plus-EN54
Power 15/7.5/3.75 (8) W
Impedance (100V) 667/1333/2666 ohm
Frequency Range 64 - 20.800 Hz
Frequency Response 53 - 23.800 Hz
SPL IEC268-5, 1W/1m 80,0 dB
SPL EN54-24, Pmax/4m 81,0 dB
Sensitivity EN54-24, 1W/4m 68,1 dB
Sensitivity EN54-24, 1W/1m 80,1 dB
Dispersion -6dB, 500Hz h/v 180°
Dispersion -6dB, 1KHz h/v 180°
Dispersion -6dB, 2KHz h/v 145°
Dispersion -6dB, 4KHz h/v 95°

Technical Data (Mechanical)
Dimensions 242x108 mm
IP Rating IP21
Weight (net) 1,6 kg
Ceiling Cut-out 210 mm
Temperature Range -10 / +55 C°
Mounting screw system
Connector 4-pin screw terminal
Colour RAL 9016

Product Attributes
ic audio logo

DL-S 15-100/T plus-EN54

Technical Drawing

ic audio logo

DL-S 15-100/T plus-EN54

Frequency Response Diagram

Sensitivity
ic audio logo

DL-S 15-100/T plus-EN54

Isobar

Horizontal
Vertical
ic audio logo

DL-S 15-100/T plus-EN54

Polar Diagram

DL-S 15-100/T plus-EN54
Polar Diagram 500Hz
DL-S 15-100/T plus-EN54
Polar Diagram 1000Hz
DL-S 15-100/T plus-EN54
Polar Diagram 2000Hz
DL-S 15-100/T plus-EN54
Polar Diagram 4000Hz
DL-S 15-100/T plus-EN54
Polar Diagram 8000Hz
ic audio logo

DL-S 15-100/T plus-EN54

ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.