ic audio logo

WU-AB 06-100/T-EN54

WU-AB 06-100/T-EN54

WU-AB 06-100/T-EN54 WU-AB 06-100/T-EN54
  • Quick mounting
  • Highest reliability
  • BS 5839
15

EN 54-24:2008
Ref. Nr.: 009-15
ID-Code: SAA-LS09
1438-CPR-0270

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

The WU-AB 06-100/T-EN54 is designed with two independent speakers and 100V transformers to enable the economic operation of two separate speaker lines (A/B lines) for the highest security demands. In case of a failure of one speaker line, the redundancy of the chassis and the transformers will guarantee unimpaired function. The speaker is compliant with the British Standard BS 5839, Part 8.

The 2 x 6W powered speaker is equipped with two full-range loudspeakers and two 100V transformers with 3 power adjustments each. For additional reliability, a 2x2-pin ceramic block and thermal fuses are provided, and the speaker chassis is impregnated against wetness. The speaker is also secured with protection class IP 21C against the security risks of environmental influences.

The connecting cables can be supplied through 2 rubber grommets on each side of the rear housing. Quick and easy mounting with screws.

ic audio logo

WU-AB 06-100/T-EN54
Product WU-AB 06-100/T-EN54
Artikel Nr. 20142913

Acoustics
Power 2x6/3/1,5 W
Impedance (100V) 2 x 1667/3333/6667 ohm
Speaker ø 100 mm
Frequency Range 126 - 12.300 Hz (single) | 139 - 12.200 Hz (double)
Frequency Response 93 - 15.400 Hz (single) | 106 - 15.400 Hz (double)
SPL 1W/1m, peak 95,7 dB (single) | 101,6 dB (double)
SPL 1W/4m, peak 83,7 dB (single) | 89,6 dB (double)
SPL Pmax/4m, peak 91,4 dB (single) | 97,3 dB (double)
SPL IEC268-5, 1W/1m 89,0 dB (single) | 92,0 dB (double)
SPL IEC268-5, Pmax/1m 96,8 dB (single) | 99,8 dB (double)
Sensitivity EN54-24, 1W/1m 89,0 dB (single) | 92,0 dB (double)
Sensitivity EN54-24, 1W/4m 77,0 dB (single) | 80,0 dB (double)
Dispersion -6dB, 500Hz 180°/ 175° h/v (single) | 180°/175° h/v (double)
Dispersion -6dB, 1KHz 160° h/v (single) | 160°/150° h/v (double)
Dispersion -6dB, 2KHz 160°/150° h/v (single) | 100°/75° h/v (double)
Dispersion -6dB, 4KHz 120°/60° h/v (single) | 40°/35° h/v (double)
ic audio logo

WU-AB 06-100/T-EN54

Connections and Housing
Connector 2-pin ceramic block
Temperature Range -10 / +55 °C
Type A/B A
Dimensions 255 x 194,5 x 87 mm
Weight (net) 1,57 kg
Housing ABS
Colour RAL 9010
Mounting Screws
IP Rating IP21

Certification
Ref. Nr. 009-15
ID-Code SAA-LS09
Certificate Number 1438-CPR-0270

Product Attributes
ic audio logo

WU-AB 06-100/T-EN54

Technical Drawing

ic audio logo

WU-AB 06-100/T-EN54

Frequency Response Diagram

Sensitivity
SPL Max
ic audio logo

WU-AB 06-100/T-EN54

Isobar

Horizontal
Vertical
ic audio logo

WU-AB 06-100/T-EN54

Polar Diagram

WU-AB 06-100/T-EN54
Polar Diagram 500Hz
WU-AB 06-100/T-EN54
Polar Diagram 1000Hz
WU-AB 06-100/T-EN54
Polar Diagram 2000Hz
WU-AB 06-100/T-EN54
Polar Diagram 4000Hz
WU-AB 06-100/T-EN54
Polar Diagram 8000Hz
ic audio logo

WU-AB 06-100/T-EN54
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.