ic audio logo

WA 06-165/T Metal-EN54 STR

WA 06-165/T Metal-EN54 STR

WA 06-165/T Metal-EN54 STR
  • All-metal construction
  • Vandal-proof
  • LED strobe flashlight
17

EN 54-24:2008
Ref. Nr.: 007-13
ID-Code: SAA-LS07
1438-CPR-0231

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

This loudspeaker is the ideal choice for sensitive application areas such as prisons and industrial environments where plastics or wood cannot be used.

The 6W speaker is equipped with a 165 mm full-range driver and a 100V transformer with three power taps. In addition, the unit features a high-performance strobe light with impressive specifications:

The new ultra–cold white 3W LED delivers extremely bright and highly visible strobe signalling, offering a colour temperature of 20,000 K and up to 200 lumens of light output. Thanks to its wide 140° beam angle, the illumination remains uniform and easily perceptible even under demanding conditions. The strobe LED operates at a supply voltage of 24V DC.

The extremely robust metal housing in RAL 9010 with corrosion-resistant powder coating provides exceptional durability while maintaining a discreet appearance. Additional operational safety is ensured by the integrated 2-pin ceramic terminal block, a thermal fuse, and the moisture impregnation of the loudspeaker chassis.

The speaker is also protected against environmental influences with an IP21C rating and complies with British Standard BS 5839, Part 8.

ic audio logo

WA 06-165/T Metal-EN54 STR
Product WA 06-165/T Metal-EN54 STR
Artikel Nr. 20206749

Acoustics
Power 6/3/1,5 W
Impedance (100V) 1667/ 3333/6667 ohm
Speaker ø 165 mm
Frequency Range 170 - 18.500 Hz
Frequency Response 70 - 23.500 Hz
Light intensity 14 cd
SPL 1W/1m, peak 98,3 dB
SPL 1W/4m, peak 86,3 dB
SPL Pmax/4m, peak 94,0 dB
SPL IEC268-5, 1W/1m 94,0 dB
Sensitivity EN54-24, 1W/1m 94,0 dB
Sensitivity EN54-24, 1W/4m 82,0 dB
Dispersion -6dB, 500Hz h/v 180°/180°
Dispersion -6dB, 1KHz h/v 160°/160°
Dispersion -6dB, 2KHz h/v 120°/120°
Dispersion -6dB, 4KHz h/v 76°/76°
ic audio logo

WA 06-165/T Metal-EN54 STR

Connections and Housing
Connector 2-pin ceramic block
Terminal Diameter 3,2 mm
Maximum Cable Passage 8 mm²
Max. cable cross section loop 2x2mm²
Temperature Range -10 / +55 C°
Type A/B A
Dimensions 252x192x82 mm
Weight (net) 1,95 kg
Housing metal
Colour RAL 9010
Mounting Screws
IP Rating IP21

Certification
Ref. Nr. 007-13
ID-Code SAA-LS07
Certificate Number 1438-CPR-0231

Product Attributes
ic audio logo

WA 06-165/T Metal-EN54 STR

Technical Drawing

ic audio logo

WA 06-165/T Metal-EN54 STR

Frequency Response Diagram

Sensitivity
SPL Max
ic audio logo

WA 06-165/T Metal-EN54 STR

Isobar

Horizontal
Vertical
ic audio logo

WA 06-165/T Metal-EN54 STR

Polar Diagram

WA 06-165/T Metal-EN54 STR
Polar Diagram 500Hz
WA 06-165/T Metal-EN54 STR
Polar Diagram 1000Hz
WA 06-165/T Metal-EN54 STR
Polar Diagram 2000Hz
WA 06-165/T Metal-EN54 STR
Polar Diagram 4000Hz
WA 06-165/T Metal-EN54 STR
Polar Diagram 8000Hz
ic audio logo

WA 06-165/T Metal-EN54 STR
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.