ic audio logo

WA-AB 06-100/T-EN54V-W

WA-AB 06-100/T-EN54V-W

WA-AB 06-100/T-EN54V-W
  • quick mounting
  • highest reliability
  • WAGO 221 connector
12

EN 54-24:2008
Ref. Nr.: 008-13
ID-Code: SAA-LS08
1438-CPR-0230

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

The WA-AB 06-100/T-EN54V-W is designed with two independent speakers and 100V transformers to enable the economic operation of two separate speaker lines (A/B lines) for the highest security demands. In case of a failure of one speaker line, the redundancy of the chassis and the transformers will guarantee unimpaired function. 

The 2x6W powered speaker is equipped with two full-range loudspeakers and two 100V transformers with 3 power adjustments each. The high-density, shock-resistant MDF wood housing in RAL 9010 provides a low resonance sound. A sturdy front grille made of steel guarantees enduring stability. For additional reliability, the speaker chassis is impregnated against wetness. Fast and easy installation with WAGO 221 connector.

The speaker is also secured with the high protection class IP 54 against the security risks of environmental influences. Quick and easy mounting with screws.

ic audio logo

WA-AB 06-100/T-EN54V-W
Product WA-AB 06-100/T-EN54V-W
Artikel Nr. 20102183V-W

Acoustics
Power 2x 6/3/1,5 W
Impedance (100V) 2 x 1667/3333/6667 ohm
Speaker ø 100 mm
Frequency Range 227 - 14.600 Hz (single) | 224 - 14.300 Hz (double)
Frequency Response 165 - 23.500 Hz (single) | 162 - 23.500 Hz (double)
SPL 1W/1m, peak 100,7 dB (single) | 105,9 dB (double)
SPL 1W/4m, peak 88,7 dB (single) | 93,9 dB (double)
SPL Pmax/4m, peak 96,4 dB (single) | 101,6 dB (double)
SPL IEC268-5, Pmax/1m 98,8 dB (single) | 101,8 dB (double)
Sensitivity EN54-24, 1W/4m 79,6 dB
Dispersion -6dB, 500Hz 175° h/v (single) | 180° h/v (double)
Dispersion -6dB, 1KHz 180°/160° h/v (single) | 145°/130° h/v (double)
Dispersion -6dB, 2KHz 150°/135° h/v (single) | 90°/80° h/v (double)
Dispersion -6dB, 4KHz 105°/90° h/v (single) | 50°/40° h/v (double)
ic audio logo

WA-AB 06-100/T-EN54V-W

Connections and Housing
Connector WAGO 221 connector
Terminal Diameter 3,2 mm
Maximum Cable Passage 8 mm² (single)
Max. cable cross section loop 4mm² (single)
Temperature Range - 10 / +55 °C
Type A/B A
Dimensions 252x194x82 mm
Weight (net) 2,24 kg
Housing MDF
Colour RAL 9010
Mounting screws
IP Rating IP54

Certification
Ref. Nr. 008-13
ID-Code SAA-LS08
Certificate Number 1438-CPR-0230

Product Attributes
ic audio logo

WA-AB 06-100/T-EN54V-W

Technical Drawing

ic audio logo

WA-AB 06-100/T-EN54V-W

Frequency Response Diagram

Sensitivity
SPL Max
ic audio logo

WA-AB 06-100/T-EN54V-W

Isobar

Horizontal
Vertical
ic audio logo

WA-AB 06-100/T-EN54V-W

Polar Diagram

WA-AB 06-100/T-EN54V-W
Polar Diagram 500Hz
WA-AB 06-100/T-EN54V-W
Polar Diagram 1000Hz
WA-AB 06-100/T-EN54V-W
Polar Diagram 2000Hz
WA-AB 06-100/T-EN54V-W
Polar Diagram 4000Hz
WA-AB 06-100/T-EN54V-W
Polar Diagram 8000Hz
ic audio logo

WA-AB 06-100/T-EN54V-W
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.