ic audio logo

DL-A-AB 06-100/T-EN54W

DL-A-AB 06-100/T-EN54W

DL-A-AB 06-100/T-EN54W
  • Quick mounting
  • WAGO 221 connector
  • BS 5839
15

EN 54-24:2008
Ref. Nr.: 004-15
ID-Code: SAA-LS04
1438-CPR-0448

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

The DL-A-AB 06-100/T-EN54 is a surface-mounted ceiling speaker designed with two independent speakers and 100V transformers to enable the economic operation of two separate speaker lines (A/B lines) for the highest security demands. In case of a failure of one speaker line, the redundancy of the chassis and the transformers will guarantee unimpaired function. The speaker is compliant with the British Standard BS 5839, Part 8.

The 2x6W powered speaker is equipped with two full-range loudspeakers and two 100V transformers with 3 power adjustments each. The surface-mounted loudspeaker for voice alarms, made of powder-coated metal in RAL 9010, impresses with its flat and elegant design for inconspicuous installations. 

For additional reliability, the speaker chassis is impregnated against wetness. Fast and easy installation with the WAGO 221 connector. The included rear metal plate is fixed by screws on the ceiling.

ic audio logo

DL-A-AB 06-100/T-EN54W
Product DL-A-AB 06-100/T-EN54W
Artikel Nr. 20142910-W

Acoustics
Power 2x6/3/1,5 W
Impedance (100V) 2 x 1667/3333/6667 ohm
Speaker ø 100 mm
Frequency Range 182 - 17.400 Hz (single) | 279 - 17.600 Hz (double)
Frequency Response 192 - 23.500 Hz (single) | 197 - 23.500 Hz (double)
SPL 1W/1m, peak 97,6 dB (single) | 102,9 dB (double)
SPL 1W/4m, peak 85,6 dB (single) | 90,9 dB (double)
SPL Pmax/4m, peak 93,3 dB (single) | 98,6 dB (double)
SPL IEC268-5, 1W/1m 90,0 dB (single) | 92,0 dB (double)
SPL IEC268-5, Pmax/1m 97,8 dB (single) | 99,8 dB (double)
Sensitivity EN54-24, 1W/1m 90,0 dB (single) | 92,0 dB (double)
Sensitivity EN54-24, 1W/4m 78,0 dB (single) | 80,0 dB (double)
Dispersion -6dB, 500Hz 180° h/v (single)| 180° h/v (double)
Dispersion -6dB, 1KHz 170° h/v (single) | 160° h/v (double)
Dispersion -6dB, 2KHz 132°/124° h/v (single) | 72°/122° h/v (double)
Dispersion -6dB, 4KHz 130°/103° h/v (single) | 37°/86° h/v (double)
ic audio logo

DL-A-AB 06-100/T-EN54W

Connections and Housing
Connector WAGO 221 connector
Temperature Range -10 / +55 °C
Dimensions 208 x 89 mm
Weight (net) 1,90 kg
Housing metal
Colour RAL 9010
Mounting Screws
IP Rating IP21

Certification
Ref. Nr. 004-15
ID-Code SAA-LS04
Certificate Number 1438-CPR-0448

Product Attributes
ic audio logo

DL-A-AB 06-100/T-EN54W

Technical Drawing

ic audio logo

DL-A-AB 06-100/T-EN54W

Frequency Response Diagram

Sensitivity
SPL Max
ic audio logo

DL-A-AB 06-100/T-EN54W

Isobar

Horizontal
Vertical
ic audio logo

DL-A-AB 06-100/T-EN54W

Polar Diagram

DL-A-AB 06-100/T-EN54W
Polar Diagram 500Hz
DL-A-AB 06-100/T-EN54W
Polar Diagram 1000Hz
DL-A-AB 06-100/T-EN54W
Polar Diagram 2000Hz
DL-A-AB 06-100/T-EN54W
Polar Diagram 4000Hz
DL-A-AB 06-100/T-EN54W
Polar Diagram 8000Hz
ic audio logo

DL-A-AB 06-100/T-EN54W
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.