Operation, Installation and Maintenance Manual
DK 6/T RAL 9016 MED
barcode 4 260590 186669

Horn speaker for marine application, 6W power, certified according to MED/1.44b

Mechanical Data
Colour RAL 9016
Dimensions 144x150 mm
Weight (net) 1,20 kg
Power 6/3/1,5 W
Connector cable (1m)
Mounting mounting bracket
Environmental Category: Category B (IEC 60945 - Exposed Equipment)
0098/2026 (EU) 2026/1434, item No. MED/1.44b. SOLAS 1974 as
amended, Regulation II-2/12,21,22, III/4, 6 & X/3, LSA Code VII,
HSC Code 4,8, IMO MSC.1/Circ. 808, 1369/Add.1
suitable for:
  • Cargo ships
  • Passenger ships without SRtP
  • Passenger ships with SRtP
Compass Safe Distance: min. 5 m
to prevent magnetic interference with navigational instruments
DK 6/T RAL 9016 MED
barcode 4 260590 186669
Mounting Instruction
  1. Mount the bracket on the wall or ceiling with the appropriate screws for the surface.
  2. Fix the speaker to the bracket with the supplied stainless steel nuts (M6) and align it.
  3. Select the required power tapping on the back of the speaker.
  4. Connect the lead-out connection cable to the 100V loudspeaker line with the correct polarity.
An integrated thermal fuse automatically disconnects the loudspeaker driver in the event of excessive heat (e.g. due to fire or driver failure), preventing a short circuit across the 100V line. Do not bypass or remove the thermal fuse under any circumstances. Verify the integrity of the connection cable during periodic maintenance.