EN54
DL 06-165/T-EN54
barcode 4 260590 180247

Ceiling speaker for Voice Alarm, power 6W, certified EN 54-24

Mechanical Data
Colour RAL 9010
Dimensions 220x110 mm
Ceiling Cut-out 198 mm
Weight (net) 1,43 kg
Power 6/3/1,5 W
Connector 2-pin ceramic block
Terminal Diameter 3,2 mm
Maximum Cable Passage 8 mm²
Mounting Quick fit mounting
EN54
DL 06-165/T-EN54
barcode 4 260590 180247
Mounting Instruction
  1. Create the necessary ceiling cut-out and check the installation depth.
  2. Fix the outer ring in the ceiling.
  3. Attach the fire dome to the ring in the ceiling.
  4. Lift the three springs on the spring slots on the ring, and turn them to the side. Guide the connection cable through the opening.
  5. Position the fire dome below the notches and then push it upwards. Turn the springs back into the spring slots (starting position).
  6. Connect the loudspeaker cable to the 100V and COM terminals.
    If necessary, select a different power tapping.
  7. Use the enclosed mounting hook to place the grille in the speaker ring and turn it clockwise.

Please note: Do not insert the hook into the grille more than 5mm from the outer ring to avoid damage. We recommend loosening the cable lug with a flat-blade screwdriver when changing the cable to a different power tapping.

Cable lug