EN54
WA 06-165/T-EN54W
barcode 4 260590 181718

Wall speaker for Voice Alarm, power 6W, certified EN 54-24

Technical Data
Colour white
Dimensions 252x192x82 mm
Dispersion -6dB, 500Hz h=180° v=180°
Dispersion -6dB, 1KHz h=83° v=74°
Dispersion -6dB, 2KHz h=100° v=115°
Dispersion -6dB, 4KHz h=55° v=53°
Sensitivity EN54-24, 1W/4m 79,5 dB
Frequency Range 197 - 21.900 Hz
Frequency Response 175 - 23.500 Hz
Power 6/3/1,5 W
EN54
WA 06-165/T-EN54W
barcode 4 260590 181718
Mounting Instruction
  1. Guide the connection cables through the cut-out in the rear panel of the speaker.
  2. Attach the back panel of the speaker to the wall. Use the enclosed screws.
  3. Connect the speaker cable with the WAGO terminals to 100V and COM: select the input with the corresponding power label according to the required power. Push the corresponding lever clamp upwards and insert the cable. Now lower the lever of the terminal again to fix the cable.
  4. Place the loudspeaker housing on one side of the rear wall so that the clamping spring engages in the hole. Press the second clamping spring inwards with a screwdriver and at the same time press the speaker against the wall so that the second clamping spring engages
  5. Use the enclosed plastic caps to cover the side holes.

Please note: To avoid damage, we recommend loosening the cable lug with a flat-blade screwdriver when changing the cable to a different power tapping.

Cable lug