EN54
PRO 150-200/T plus black-EN54
barcode 4 260590 185655

2-way coaxial horn speaker for Voice Alarm, 150W power, certified EN 54-24

Technical Data
Colour black
Dimensions 315x305x350 mm
Dispersion -6dB, 500Hz 170° (h) 180° (v)
Dispersion -6dB, 1KHz 79° (h) 80° (v)
Dispersion -6dB, 2KHz 50° (h) 62° (v)
Dispersion -6dB, 4KHz 85° (h) 70° (v)
Sensitivity EN54-24, 1W/4m 84,7 dB
Frequency Range 90 - 19.000 Hz
Frequency Response 75 - 20.000 Hz
SPL IEC268-5, 1W/1m 98,0 dB
SPL EN54-24, Pmax/4m 102,5 dB
Power 150/75/38W (8ohm)
EN54
PRO 150-200/T plus black-EN54
barcode 4 260590 185655
Mounting Instruction
  1. Mount the inclination-adjustable stainless steel bracket on the ceiling. See the drawing below to set the right angle.
  2. Attach the speaker with the screws to the stainless steel bracket.
  3. Remove the rear cover of the loudspeaker.
  4. Guide the loudspeaker cable through the cable gland.
  5. Connect the loudspeaker cable to the rear terminal.
    Make power adjustments at the rear of the speaker as needed.
  6. Replace the rear cover.
PRO 150-200/T EN54