ic audio logo

LS 50 RUP Gira Standard 55

LS 50 RUP Gira Standard 55

LS 50 RUP Gira Standard 55
  • 1-gang combination and rotary switch
  • GIRA Standard 55 frame
  • sturdy screw terminal

EN 54-24:2008
:
:

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

The volume control with 1-gang combination and rotary switch, colour pure white matt for flush-mounting, provides a 24 Volt priority override relay. The 50W volume control is equipped with a 12-step continuously rotating attenuation switch with a zero position without remaining volume. The connection is done by a sturdy screw terminal.

ic audio logo

LS 50 RUP Gira Standard 55

Technical Data (Electrical)
Description LS 50 RUP Gira Standard 55
Power 50 W

Technical Data (Mechanical)
Dimensions 81x81x74mm
Weight (net) 0,26 kg
Mounting screws
Connector screw-terminal
Colour pure white matt

Product Attributes
ic audio logo

LS 50 RUP Gira Standard 55
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.