ic audio logo

AMP 240

AMP 240

AMP 240
  • 24V emergency power supply
  • remote start
  • 230V and 115V operation

EN 54-24:2008
:
:

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

The power amplifier AMP 240 (240 Watt) is the medium powered modell in the amplifier series. In regard to the equipping it This power amplifier has balanced and unbalanced inputs (XLR, cinch, 1⁄4 inch jack) for preamplifiers or mixers.

Identical connectors for loop through are available to plug in additional amplifiers. Speakers can be connected to the 100Volt or 8Ohm output depending on your requirements. The amplifier comes in space-saving 19-inch cases (2U). The blue power-LED and the LED-VU-meter on the front panel inform you about the operating status.

This model can be supplied by a 24 Volt emergency power source. The amplifier is equipped with a remote start relay. Feeding 24 V DC to the remote control input bridges the mains power switch.

ic audio logo

AMP 240

Technical Data (Electrical)
Description AMP 240

Technical Data (Mechanical)
Dimensions 88x483x300 mm
Weight (net) 11,20 kg
Colour black

Product Attributes
ic audio logo

AMP 240
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.