ic audio logo

AMP 480

AMP 480

AMP 480 AMP 480
  • 24V emergency power supply
  • remote start
  • 230V and 115V operation

EN 54-24:2008
:
:

ic audio GmbH, Boehringerstraße 14a,
D-68307 Mannheim, Germany

CE-Symbol gemäß Richtlinie 93/68EWG

With a generous 480 Watt power output the AMP 480 is the perfect power amplifier for complex PA requirements. External signal sources like preamplifiers or mixer amplifiers can be connected by XLR, cinch or jack connectors balanced or unbalanced.

The AMP 480 offers a 100Volt speaker output and an 8Ohm connection for low impedance speakers. The amplifier, which is protected against overload and short circuit, comes in a 19-inch /3U housing. A blue power-LED and a LED-VU-meter give information about the operating condition of the amplifier. For safe operation a temperature controlled fan and a 24 Volt DC emergency power input are also provided.

Also a fine feature is the remote start of the amplifier. Feeding 24 V DC to the remote control input bridges the main power switch. And if more »power« is required, you can easily link it to more amplifiers via the through connectors.

ic audio logo

AMP 480

Technical Data (Electrical)
Description AMP 480

Technical Data (Mechanical)
Dimensions 133x483x385 mm
Weight (net) 24,00 kg
Colour black

Product Attributes
ic audio logo

AMP 480
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating specified is based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.