DL-A-AB 06-100/T-EN54

DL-A-AB 06-100/T-EN54

  • Quick mounting
  • Highest reliability
  • BS 5839
DL-A-AB 06-100/T-EN54
DL-A-AB 06-100/T-EN54

A/B-line Ceiling speaker with metal backplate for Voice Alarm applications, certified according to EN 54-24, suitable for voice announcements and background music with excellent sound quality in buildings.

The DL-A-AB 06-100/T-EN54 is a surface-mounted ceiling speaker designed with two independent speakers and 100V transformers to enable the economic operation of two separate speaker lines (A/B lines) for the highest security demands. In case of a failure of one speaker line, the redundancy of the chassis and the transformers will guarantee unimpaired function. The speaker is also compliant with the British Standard BS 5839, Part 8.

The 2 x 6W powered speaker is equipped with two full-range loudspeakers and two 100V transformers with 3 power adjustments, each. This sturdy ceiling speaker is made of powder-coated metal in white (RAL 9010). Flat and well-designed speaker for unobtrusive installations, equipped with ceramic clamps and thermal fuses, protected against wet conditions by waterproofed chassis. Easy installation by the included rear plate made of metal, fixed by screws on the ceiling.

Article No.: 20142910
ProductDL-A-AB 06-100/T-EN54
Power 2x6/3/1,5 W
Impedance (100V) 2 x 1667/3333/6667 ohm
Information Frequency Range 182 - 17.400 Hz (single)
279 - 17.600 Hz (double)
Information Frequency Response 192 - 23.500 Hz (single)
197 - 23.500 Hz (double)
Information SPL 1W/1m, peak 97,6 dB (single)
102,9 dB (double)
Information SPL 1W/4m, peak 85,6 dB (single)
90,9 dB (double)
Information SPL Pmax/4m, peak 93,3 dB (single)
98,6 dB (double)
SPL IEC268-5, 1W/1m 90,0 dB (single)
92,0 dB (double)
SPL EN54-24, Pmax/4m 86,0 dB (single)
90,0 dB (double)
Information Sensitivity EN54-24, 1W/1m 90,0 dB (single)
92,0 dB (double)
Information Sensitivity EN54-24, 1W/4m 78,0 dB (single)
80,0 dB (double)
Dispersion -6dB, 500Hz single h/v 180°
double h/v 180°
Dispersion -6dB, 1KHz single h/v 170°
double h/v 160°
Dispersion -6dB, 2KHz single h/v 132°/124°
double h/v 72°/122°
Dispersion -6dB, 4KHz single h/v 130°/103°
double h/v 37°/86°
Connector 2-pin ceramic block
Cable lugs yes
Temperature Range -10 / +55 °C
Dimensions 208 x 89 mm
IP Rating IP21
Weight (net) 1,90 kg
Colour RAL 9010
Mounting Screws
Packing Unit 8
Ref. Nr. 004-15
ID-Code SAA-LS04
Certificate Number 1438-CPR-0448
CE Year 15
BS5839 EN 54-24 UV Protection Damp Protection Shock Resistant Measurements Special Colours Metal IP21
ic audio loudspeakers are tested and classified according to the IEC standard 60529 (degree of protection by enclosure) against the penetration of foreign objects and moisture. The classification is conforming to standards through characterization with a fixed code. This code consists of the letters IP (International Protection) followed by two digits. The first digit indicates the degree of protection against dust and the second digit the degree of protection against water. Please note that the testing of the products has been carried out in laboratory conditions which are not always 100% comparable with the conditions of different installation environments. This protection can be reduced due to normal wear and tear depending on the installation environment.
RoHS compliant (2011/65/EU)
The IP rating as well as the temperature range specified are based on ic audio test results, not on CNBOP-PIB test results. Certification only verifies the minimum requirements for EN54-24 compliance.
Technical Drawing
Sensitivity
SPLmax
DL-A-AB 06-100/T-EN54
Isobar horizontal
DL-A-AB 06-100/T-EN54
Isobar vertical
DL-A-AB 06-100/T-EN54
Polar Diagram 500Hz
DL-A-AB 06-100/T-EN54
Polar Diagram 1000Hz
DL-A-AB 06-100/T-EN54
Polar Diagram 2000Hz
DL-A-AB 06-100/T-EN54
Polar Diagram 4000Hz
DL-A-AB 06-100/T-EN54
Polar Diagram 8000Hz

RAL Colour

RAL coating

RAL Colour